Selected Projects
Aerial-Lift Electrical Evaluation, Greater New Orleans (2023)
We typically respond within one business day.
Project at a glanceDE-PRJ-8121
- Practice
- Forensic
- Location
- New Orleans, LA
- Service
- Equipment evaluation
- Client
- Confidential
Aerial-Lift Electrical Evaluation, Greater New Orleans (2023)
This 2023 job in the Greater New Orleans area of Louisiana was an aerial-lift electrical evaluation, on the kind of lift most people call a bucket truck. Client details stay confidential.

Electrical testing. We evaluate equipment that works near energized lines against the way it’s used.
A bucket truck that works near energized lines
An aerial lift that puts workers near energized conductors is as much safety equipment as it is a work platform. On an insulated unit, the boom sections and other components are designed to resist the flow of current, and a casual look won’t tell you whether they still do. Weathering, surface contamination, moisture and mechanical damage can all wear that insulation down without leaving any obvious sign on the outside. Our task was to evaluate the electrical condition of a bucket truck in the Greater New Orleans area and document what we found. That way, decisions about the truck could rest on engineering evidence.
How an insulated boom protects the worker
The point of an insulated aerial device is to protect the people using it by putting dielectric material between an energized line and paths to ground. That’s usually fiberglass boom sections and the parts that go with them. The material only protects workers as long as it still insulates. Its dielectric strength can drop with age, ultraviolet exposure and abrasion. Contamination worked into the surface can lower it, and so can absorbed moisture or an old repair. You can’t reliably judge any of that by eye, so industry practice calls for electrical evaluation of insulated lifts at regular intervals, on top of the routine mechanical inspection. A proper evaluation looks at the condition of the insulating system and at how the unit is configured and maintained. It also asks whether the equipment as a whole is still fit for safe work near energized lines.
Testing units that are already in service
Insulated aerial devices have a consensus standard of their own. ANSI® and ASSP® A92.2 covers vehicle mounted elevating and rotating aerial devices, and it distinguishes three kinds of testing. Design qualification tests are done on a device type, and acceptance tests when a unit is placed in service. Periodic in-service tests are for units that are already working. Federal workplace rules expect the same thing for line work. OSHA’s requirements for electric power generation, transmission, and distribution treat an aerial lift used near energized conductors as insulating equipment whose insulating value has to be maintained and verified.
The testing is periodic because dielectric performance degrades invisibly, and an inspection alone won’t catch that. Ultraviolet exposure and abrasion break down the surface of fiberglass boom sections, and the microcracking that results gives contamination a place to lodge. Conductive dust, salt, hydraulic oil and leftover cleaning products all form leakage paths across a surface. Moisture soaked into a damaged surface does the same thing. That’s why humid coastal service is harder on insulated equipment than dry service is. Repairs and refinishing can make a unit look good again without bringing back its dielectric strength. A unit that looks new after bodywork is exactly the kind that should be tested.
An evaluation covers the whole insulating system. That includes the condition of the boom and any insulated inserts, the liner and the platform, and the way the hydraulic and electrical lines are routed across the insulating gap. The upper and lower controls are part of it too, along with the bonding and grounding arrangement the unit relies on. The owner comes away with a documented basis for deciding whether the unit can stay in service, needs specific conditions corrected first, or should come out of service until they are.
Our evaluation of this bucket truck
We evaluated the lift’s electrical condition and wrote up what we found. For this class of equipment, our review centered on the insulating components and the electrical integrity of the unit overall. We also looked for any condition that could affect worker protection while the lift operates near energized conductors. The client got a written engineering evaluation setting out what we observed and what we recommended, so they had something clear and documented to act on. Licensed Professional Engineers oversaw it, as they do all of our electrical consulting.
Deciding whether a unit stays in service
Bucket trucks routinely put people within reach of energized power lines, and up there the margin for error is small. An electrical evaluation gives the owner an engineering basis for keeping a unit in service or scheduling maintenance, and for removing it from use if it comes to that. It also gives the workers in the bucket a documented reason to trust the equipment under them. Utilities and line contractors rely on assessments like this to manage electrical risk in their operations, and so do municipalities and fleet owners. We did this job as part of our electrical power consulting services, and we take on electrical engineering work for clients across Louisiana.
Forensic
Related projects
Alabama
Alabama Utility Equipment Failure Investigations
Failure analysis
North Dakota and Texas
Bench Examinations of a Burned Control Panel and Two Breakers
Component examination
Texas
Chiller Drive Fire Analysis, Texas
Failure analysis
More work in: Louisiana
Get your project started
We typically respond within one business day.