Selected Projects
Soil Corrosivity Study for a New 24-Inch Ductile Iron Water Line, Fort Worth (2021)
We typically respond within one business day.
Project at a glanceDE-PRJ-10838
- Practice
- Corrosion and CP
- Location
- Fort Worth, TX
- Service
- Soil corrosivity study
- Client
- Confidential
Soil Corrosivity Study for a New 24-Inch Ductile Iron Water Line, Fort Worth (2021)
In June 2021 we studied the soil along a planned 24-inch ductile iron water line in Fort Worth, about 5,500 feet long, and recommended how to protect the pipe from corrosion.
Testing
On June 21, 2021 a crew ran Wenner four-pin tests (ASTM® G57) at five locations along the alignment, with pin spacings from 2.5 to 20 feet, and the readings were reduced to layer resistivities with the Barnes method. Between 2.5 and 10 feet deep, the average layer resistivity was 2,666 ohm-cm and the lowest 1,114 ohm-cm. On resistivity alone that is moderately corrosive ground. The geotechnical information showed mostly gravelly clays, and taken together we judged the soils a high corrosion risk to ferrous metal.
Recommendations
For ductile iron pipe in this ground we recommended sacrificial anodes. They protect the pipe and also lower the chance of interference with two gas lines, run by two operators, that follow the route and cross it at 60 and 90 degrees. The memorandum also covers electrical isolation, bonds across nonconductive joints, test stations no more than 1,500 feet apart, coatings, and protection of buried fittings. The cathodic protection design for the line followed later in 2021.
Related services
The testing is described on our soil corrosivity analysis page, and the next step under cathodic protection design.
Corrosion and CP
Related projects
Houston, TX
Galvanic CP Designs for Two Water Line Replacements, Houston
Soil corrosivity, CP design
Taylor, TX
Soil Corrosivity Memo for a New Industrial Gas Plant, Taylor
Soil corrosivity study
New Braunfels, TX
Soil Corrosivity Study for a Water Line, New Braunfels
Soil corrosivity study
More work in: Texas
Get your project started
We typically respond within one business day.